Sacred Texts  Age of Reason  Index 
XI. The Notes on Sculpture Index
  Previous  Next 

The Da Vinci Notebooks at sacred-texts.com

739.

TO COMBINE LEAD WITH OTHER METAL.

If you wish for economy in combining lead with the metal in order to lessen the amount of tin which is necessary in the metal, first alloy the lead with the tin and then add the molten copper.

HOW TO MELT [METAL] IN A FURNACE.

The furnace should be between four well founded pillars.

OF THE THICKNESS OF THE COATING.

The coating should not be more than two fingers thick, it should be laid on in four thicknesses over fine clay and then well fixed, and it should be fired only on the inside and then carefully covered with ashes and cow's dung.

OF THE THICKNESS OF THE GUN.

The gun being made to carry 600 Ibs. of ball and more, by this rule you will take the measure of the diameter of the ball and

p. 23

divide it into 6 parts and one of these parts will be its thickness at the muzzle; but at the breech it must always be half. And if the ball is to be 700 lbs., 1/7th of the diameter of the ball must be its thickness in front; and if the ball is to be 800, the eighth of its diameter in front; and if 900, 1/8th and 1/2 [3/16], and if 1000, 1/9th.

OF THE LENGTH OF THE BODY OF THE GUN.

If you want it to throw a ball of stone, make the length of the gun to be 6, or as much as 7 diameters of the ball; and if the ball is to be of iron make it as much as 12 balls, and if the ball is to be of lead, make it as much as 18 balls. I mean when the gun is to have the mouth fitted to receive 600 lbs. of stone ball, and more.

OF THE THICKNESS OF SMALL GUNS.

The thickness at the muzzle of small guns should be from a half to one third of the diameter of the ball, and the length from 30 to 36 balls.


Next: 740.